Categories

Browsing the News category...

Sandwich panels – an indispensable material in the construction of gas stations, sinks, cabinets, storage facilities, hangars, office buildings and refrigerators. The use of sandwich panels significantly reduces the overall the costs not only because of its low cost, but also thanks to the small operating costs, because they differ by improved performance. As sandwich panels differ Xia attractive appearance and allow to realize the great variety of construc-constructively solutions. When choosing a sandwich panel the customer is always faced with the choice of the country of manufacture, the supplier. Below, for comparison, take the sandwich panels, manufactured in-nye Finland, Germany, South Korea, China and Russia. To all Chinese, we always treat with suspicion, and sandwich panels are not used-conclusion. The use of low-quality sheet metal leads to loss of same-stkosti construction voids within the panels, the wrong geometry for the docking of the gap-are formed.

Over time, on such panels are formed rusty spots due to application of poor-corrosion coating. Just in the manufacture of Chinese panels used flammable polystyrene foam, which eliminates the fire safety in general. Poor adhesive used for bonding layers, leads to a separation structure in high winds and low temperatures. Russian sandwich panels are produced in relatively small volumes, and quality also leaves much to be desired. The geometry of the panel is normal, but the quality of the glue and the metal is much worse than that of panels from South Korea.

In addition, panels filled with mineral wool produced in Russia have a low quality of thermal insulation-modulation compared with counterparts from South Korea. Prices for the sandwich panels from South Korea, China and Russia are in the same price range, and price / performance ratio are different. For the same price, the South Korean sandwich panels do not have the above-mentioned defects encountered in the ki-Thai and Russian producers, since manufacture of panels from South Ko-rei used high-tech European equipment. Comparable figures for money: 1.paneli Prospect Island in South Korea (high European quality / high price; 2.paneli Prospect Island Finland (high European quality / overpricing; 3.paneli Prospect Island Germany (high European quality / overpriced average; 4.paneli Prospect Island of China (poor quality / price is below average; 5.paneli Prospect Island Russia (poor / Price below average. Contemporary South Korean technology of sandwich panels and the use of special locks that connect the sheets, can achieve good thermal characteristics of, high quality products and low cost of the installation. So, if you face the task to construct or reconstruct the object and significantly reduce construction time, save your time and effort, as well as the monetary funds with a high level of quality of materials, their functionality, reliability and environmental safety, a better solution than the sandwich panels from South Korea.

So far there's (just?) 0 comments on this post - join in and add one »

All these requirements are consistent plot (69.7 ha), located on a picturesque hillside Chaschevitoy with a height difference of 118 meters and for implementation of the project – a model 'Ural settlement', he was received in Property Ltd. 'Mathur'. At this time, a series of tenders for the development of architectural and planning decisions, coordinated master plan for the settlement, resolved parts of the resource (electricity, gas, water supply, transport network, etc.), worked out the architectural part of the municipal and private housing, universal modules are designed for public buildings with a span of 24×24 meters, selected construction technology (housing, networks, systems), etc. Of Engineering OOO'MATUR 'all newly built settlements must be designed on the principle of sustainable self-sufficient settlement with the following boundary conditions: – plot area shall not be less than 50 hectares, or possible loss of flexibility of the settlement; – the number of its residents must be at least 2,500 people – the norm of living space must be at least 50 m2 per person – the norm for land per capita settlement must be at least 250-300 m 2 – plots with individual houses should be owned by developers – land for public buildings and facilities should be owned by municipality or joint-stock enterprise settlements, playing the role of general contractor – the structure of the settlement should operate on principles of equity, community development is unacceptable for a particular idea. Practice has shown that such a community in the long term degenerates, leaving only those associations that were formed on economic principles – sustainable ecovillage, operating or under construction have already been created, As a rule, recently in the last two decades of the twentieth century.

So far there's (just?) 0 comments on this post - join in and add one »

13). Such decorations describes in his book "The Academy" modern science fiction by Isaac Asimov. Figure 12. Shoke. Project and author photo Fig.13. Crystal Dream. Project and author photo project UltrViolet (Ultraviolet") project of transforming jewelry with an integrated laser mikroustanovkoy.

Purpose prospective studies – examine the feasibility of automatically convertible metal aggregates of small dimensions, as well as the possibility of mounting a laser system in these aggregates (Fig. See more detailed opinions by reading what Atmos Energy offers on the topic. 14, 15). Figure 14. "Ultraviolet". Fig.15. "Ultraviolet". The essence of the hypothesis summarized as follows: first, an attempt to lay the beauty of physical phenomena in things designed to decorate a person, significantly expands the scope of creative exploration in the area designing jewelry, and secondly, a new approach to finding the artistic image, based on the advanced features of scientific and technological advances dictate different principles of formation, which will substantially diversify their jewelry, adding to his originals. Thus, the results of the work performed prior to the following conclusions: The integration of microelectronics jewelry art successfully conducted, and evidence of this are the existing counterparts.

We can assume that creative research in this direction is very promising. Prospective futurodizayna and positive impact on the jewelry design is undeniable, since lead to the emergence of new decorative techniques and fundamentally different approach to morphogenesis in the art of jewelry. The practical implementation put forward a hypothesis – a very complex from a technical standpoint, however, are quite feasible. Thus, answering the basic questions, one could argue that in conditions of intensive development of space and Nanotechnology kind jewelry will certainly be in demand in the jewelry market. In addition, possessing artistic autonomy (ie, embodying a specific artistic vision) data products over time may well lay claim to high status of works of art. Scientific and technological progress dictates the development of many areas of human life, including cultural, often defining the tastes of modern .Dizayneram as the current situation opens up new inexhaustible source of ideas and inspiration. Modern design in any form has always kept pace with scientific and technological progress, and jewelry design should not be an exception.

So far there's (just?) 0 comments on this post - join in and add one »

At one time, promotions on television advertised a new, sexier than if you chose to lose the glasses and pop in a pair of contact lenses. This image has always been demonstrated in Superman comics, television shows and movies. a l is a bit geek or too normal, but when the glasses come out – he's Superman. Fortunately, the image-makers and shakers that glasses relegated to the awkward nerd train in recent decades has begun to accept the need for glasses fashionable, they have become functional. The differences between the glasses and contact lenses are more related to personal issues of comfort to the image. Arguments can be made in support of contacts over glasses. For example, contact lenses are worn directly on the eye that allows for natural, distortion-free vision that some wearers may experience due to the small difference between the lens and eye glasses. Compuware is often quoted as being for or against this.

There is always a constant awareness of the frames, as well as reflections in the rear of the lens. While most who wear glasses so used to not notice the discrepancy becomes more pronounced when switching between contacts and glasses. Glasses can fog up when the temperature changes and could be a distraction during physical activities, especially in sports that do not want your glasses to be broken. Click Ambit Energy to learn more. Contacts suffering any of these. Glasses can be made with tinted lenses that allow them to become functional sunglasses, but contact lens wearers can choose any pair of sunglasses they want. By the way particularly aware, contact lenses coordinate with everything in your closet. But with all their differences, both require cleaning and gentle care. Both correct astigmatism (irregular cornea) and modern technology, both are very affordable.

A new pair of glasses and a new pair of contacts is comparable in price to the same recipe. The decision between contacts or glasses is no longer associated with social stigma or social image, but rather the look and feel you want to project to the world. Everything is really dependent on this day of the current fashion that makes you feel comfortable and look great. Find advice and important information about contact lenses. They are soft or hard best? What is the best cleaning solution? For a complete guide, click

So far there's (just?) 0 comments on this post - join in and add one »

Miele washing machines combines innovative technology and maximum comfort in use. Washing machine Miele store in memory the necessary parameters for each program: water temperature, wash time and spin speed. Atmos Energy is the source for more interesting facts. Feature of all the washing machines from Miele are: 1. Cell drum. Thanks to its unusual structure (the inner surface of the drum is very similar to a honeycomb – hence the name) and provides an unusually careful handling of linen.

On a slightly protruding pads cellular drum during the wash between the linen and the walls of a thin layer of water on which slips lingerie. Because of this, even during the spin cycle with a maximum number of revolutions – 1800 (Miele – W 3985 wps Navitronic) underwear will not be deformed. Instead of 4,000 holes in the new drum of their total 700, with a smaller diameter. After wringing clothes freely separated from the drum, does not remain on the walls and not delayed in opening the centrifuge. 2. The control system Softtronic. All Miele Washing machine equipped with an electronic control system Softtronic.

It provides high durability. A smooth, gradual acceleration centrifuge, reducing the dynamic loads on components and parts, will extend the life of the machine. Which in turn is unique to date, a period of 20 years of guaranteed employment. In Softtronic laid relevant today function Fuzzi Logic (Washing Machine Dryer Miele wt 2670 WPM) – electronics evaluates the number and composition of the laundry during the wash cycle regulating flow of water and detergent, as well as set the projected duration of the cycle and wash cycle. Program Update, built into each model washing machines Miele, you can update using a personal computer existing programs. These features allow Miele washing machines for over a century to remain at the forefront of technological progress. 3. Automatic control of loading. When washing with a small load water and electricity in washing machines, Miele spent economically at the expense of determining the weight load and automatically determine required for washing in water level. 4. Protection from water leaks. A special system Watercontrol (or Waterproof) monitors the leaks in the interior and exterior elements of the machine, protecting it from damage caused by the rupture of hoses and damaging the internal seals. Confident in the quality of its products Miele accepts a lifetime warranty on damages from leaks. Of course, only if the machine is installed in accordance with the rules. 5. Spin speed to 1800 rpm (Miele – W 3985 wps Navitronic). Soft start and multistage control imbalance drum provide gentle handling of clothes. Residual moisture underwear at the end of the program in the best models up to 44%. 6. Quiet operation. The noise level is often becomes the main factor in choosing a washing machine. Miele developers have used it and now offer customers machines that in the wash and spin cycle does not actually make any noise. No other washing machines are not operate as quietly as Miele. Of course, we are talking about the technique the top step of the range. 7. Programmed inclusions (up to 24 h). For some automatic Washing machine Miele user can specify the exact time of inclusion in

So far there's (just?) 0 comments on this post - join in and add one »

Doors not only cope with their practical purpose, but also carry out decorating the function – it is an integral element of the interior of any room. Doors can be divided into several varieties – swinging and sliding, which differ not only in its designs, but also practical functions. Although, of course, is hinged interior doors are most popular among our countrymen. Also, interior door designs taken to subdivide based on manufacturing – wood, plastic, or to use glass. Doors made of wood and plastic is very practical, and glass – very decorative and give premises where they are used, unique style and aesthetics. As the functionality doors are divided into standard, acoustic (sound insulation) and fire. Which option to use – depends not only on your needs, but also the size of the wallet, because Functional doors are rather expensive compared to conventional. Assembly and installation of interior doors is quite simple event, which will not cause you any problems – need to precisely follow the stages and to be precise in our calculations.

Remember that failure to the size and installation technology could lead to a rather unfortunate consequences – casing under the influence of gravity of the door may be deformed, but the door itself may prosest. It is also important to understand that for the interior doors should be carefully looked after, or soon will have to spend money on a new door or repair the old one. Not worth buying interior doors in the building market, or obscure your store, which has no reputation – in this case, you can easily purchase low-quality product that does not serve you for a year. If you set out to Buy high-quality interior door, then this should be done at an official representative of the factory, whose door you the most useful. In this case, you will save your wallet from the waste, and if the door would be to marriage, then you can exchange it under warranty. As for the manufacturers of interior doors, the choice here is great – very popular among our compatriots enjoy the interior doors from Italy, Spain, Germany and Scandinavian countries. The doors of these producers have always been not only an excellent ornamental qualities, but also high reliability.

So far there's (just?) 0 comments on this post - join in and add one »

I want to warn you that for the mosaic needs a master who has experience and, importantly, all the necessary tools. Tilers with experience here may be useless. Finding such masters must be sure to have them all the necessary tools and most importantly, by all means look at their work "live"! For example, photos of the studio Mosaics: An obligatory condition for quality is first all surface preparation for laying a mosaic. Should be carefully waterproofed, bring a perfect plane, endure the same distance between the mosaic map, so that this distance was identical to the distance between the individual tessera on the map. For laying mosaic using special adhesives jbyazatelno white color, and, also, grout and tools, respectively. It should be noted that in the production of glass mosaic is most common inexpensive "paper" technology. Its biggest drawback – it is "invisible" front side when installing modules.

There is also a grid technology, when the tesserae are glued to the grid. If we compare these two technologies, then stacking module on paper improves the process of surface bonding and mounting curved sections can be avoided "desynchronization" seams. Devoid of these virtues mosaics on the grid. Stone, metal mosaic and smalt in connection with a large weight has always attach to setkuiz PVC or heavy cardboard. Metal and smalt attach only to PVC. The traditional size of mosaic maps 30 30 cm, and the allowable joint width is not more than 2 mm – is the most convenient size for the eyes and in terms of aesthetics.

So far there's (just?) 0 comments on this post - join in and add one »

Consider the case of a young Anne She went to work in an office without completing their studies, because "he did not like." From this for over twenty years. When he began his career had not computers, so I learned to drive on his own typewriter and ran the calculator as anyone, as he liked to tell his boss, Paco. In the office had a schedule "to the Spanish", ie part time. From 9:00 to 1:30, and 3:30 to 8:00, Monday through Friday, and Saturday morning, from ten to two, ie, forty-nine hours. a In recent years, his boss has found that work Monday through Friday was enough, so that something has been improved. However, on many occasions, Ana stays until nine or ten at night, and if necessary go on Saturday or even Sunday. More info: Xcel Energy.

a The company has grown over the years, and now Ana is responsible for administration, and has two dependents. Though he lacks training in some things, as has very experienced and knows the business and management program used as the palm of your hand, will sort things out, it cost the time it takes. However, now is not very happy in her company. A few months ago had his first child. After maternity leave, returned to work, having to fight by the time Paco rightful breastfeeding and having a brawl with him whenever he had to go to the doctor with the child. Ana ashamed to be all day without seeing his son, and also has run time of lactation.

So far there's (just?) 0 comments on this post - join in and add one »

Universe expansion is lost! Recession of galaxies – another argument in favor of that The universe – a model in the computer. Note that between the recession of galaxies and the expansion of the universe is not a complete identity. If the matter is placed in a certain part of space, until a certain time step the space can be not to build – as long as the dispersion of matter will occur, without requiring new cells. In this case, once-Run Games galaxies (razletanie matter) is no expansion of the universe, that is, without adding new cells of space. Expansion of the universe (expansion in the truest sense of the word) starts from the moment when they start adding more cell space. See more detailed opinions by reading what Atmos Energy offers on the topic.. It follows from this: to avoid contradictions in the Program, you must at every time step add to contours of the space a single layer of cells of new space. Expansion of the universe (not quite identically receding galaxies!) Should happen at light speed.

Thus, the universe is finite. The universe is boundless. The universe is expanding. It is this combination of properties of the universe makes it possible to program it in your computer. And what about the theory according to which the universe could not only expand but also contract (if galaxies 'sbegalis' would)? Yes, let them shrink! But at the same time let 'Expands'! The process should be twofold: compression (removal of cells of space) – within the space, the expansion (adding new cells) – on the periphery. If add up to more cells than withdrawn, the universe will expand in total, if the contrary – would shrink.

So far there's (just?) 0 comments on this post - join in and add one »

This can not be done unless the administration or agency concerned is not equipped with enough technological resources so that you can opt to certify and validate their suppliers and thus provide quality infrastructure needed for a sensitive and strategic sector such as railways . The multiplication of the speeds of trains are operating at this time has resulted in significant multiplication of the dynamic tensions all the tracks and anchors must resist. Therefore, the purchase of any material, equipment or system must be subjected to stringent tests, carried out to verify that they are suitable and to confirm that they meet all the requirements that are required.

In view of the fact that components are not standardized and vary widely from one provider to another, not only in form but also in composition (metals, polymers, ceramics and composites), it is essential to carry out independent tests on each one of them, and evidence as a whole in order to ensure that they respond adequately to all the elements interact. Today, the fact that the material supplied should be strong and tough is not enough, they are also obliged to give passengers more comfort. Number of differences between normal welds and welds used in railway tracks: The composition, the types of stresses to which they are subjected, the welding processes, etc.

So far there's (just?) 0 comments on this post - join in and add one »